Armored Fiber Patch cord SC/LC/FC/ST
Description:
Armored fiber patch cord is a special design process of the bare fiber or the tight-sleeved fiber. The structure is designed with a flat spiral stainless steel material around the fiber, without affecting the various opticals possessed by the fiber itself. In addition to the performance, the anti-side pressure capability of the fiber optic cable itself is greatly improved. High-strength aramid reinforcement ensures fiber-free tensile strain. It is made of flame retardant, environmentally friendly or high temperature resistant cable covering material. It has small outer diameter, light weight, good bending performance and high flexibility. Fiber type: single mode G652, G657, multimode 50/125, 62.5/125, OM3, stainless steel armor: SUS304, SUS204.
Features:
♦ small diameter stainless steel casing protection;
♦ It can resist improper torsion damage;
♦ High tensile strength, high compression resistance and rat bite prevention;
♦ The construction is more convenient and safe;
♦ There is no need to worry about the damage to optical fiber caused by construction;
♦ There is no need to worry about the damage caused by external factors in the future;
Application:
♦ Telecom Network
♦ Local Ring Network
♦ Optical Fiber Sensor
♦ Optical Fiber Test Equipment
♦ Optical Fiber Communication System
♦ FTTH,LAN,PON & Optical CATV
Type | Note | Reference | |
SM | MM | ||
LC | APC: Green connectors , Green boots (for 0.9mm) APC: Green connectors ,White boots (for 2.0/3.0mm) UPC: Blue connectors , White boots |
UPC: Grey Connectors , White boots | IEC 61754-20 |
SC | APC:Green connectors,Green boots UPC:Blue connectors,Blue boots |
UPC:Grey Connectors,Grey boots | IEC61754-4 |
FC | APC:Green boots UPC:Black boots |
UPC:Black boots | IEC61754-13 |
ST | UPC:Black boots | UPC:Black boots | IEC61754-2 |
Assembly Structure Schematic Diagram
Jumper tolerance requirement |
|
Overall length (L) (M) |
length of tolerance(CM) |
0<L≤20 |
+10/-0 |
20<L≤40 |
+15/-0 |
L>40 |
+0.5%L/-0 |
Optical Characteristics
Item |
Parameter |
Reference | |
Single mode |
Multimode |
||
Insertion loss |
Maximum≤0.30 |
Maximum≤0.30 |
IEC 61300-3-34 |
Return loss |
≥ 60dB (APC); ≥ 50dB (UPC) |
≥30dB |
IEC 61300-3-6 |
Cable Structure
Item | Date | |
Fiber | OS2,OM1,OM2,OM3,OM4 | |
Tension member | Armored/ Kevlar | |
Max. attenuation | SM:≤0.36dB/km at 1310nm,≤0.22dB/km at 1550nm | |
MM:≤1.0dB/km at 1300nm,≤0.30dB/km at 850nm | ||
Cable Material | PVC/LSZH/OFNP/OFNR | |
Cable Color | SM:Yellow,MM:Orange,OM3:Aqua | |
Tensile resistance | long term | 250 N |
short term | 800 N | |
Crush resistance | long term | 300 N/100m |
short term | 1000 N/100m | |
Bending Radius | Static | 20D |
Dynamic | 10D | |
Temperature | -20~70℃ |